Skip to content
0151 346 1380
Trade account
EP4 Solutions
Omron E3Z-LR86 Photoelectric SensorNew
Omron

E3Z-LR86

Photoelectric SensorNewAvailable to order

Also known as: E3ZLR860MS, E3Z LR86

£149.59
ex VAT · £179.51 inc VAT
  • Brand new, unused
  • Worldwide delivery & export docs
  • Trade accounts available
  • Call 0151 346 1380 for urgent requirements

About the Omron E3Z-LR86

The Omron E3Z-LR86 is a new retro-reflective photoelectric sensor from the E3Z Laser series, using a red laser diode (655 nm, laser class 1). It offers a sensing distance of 7000 mm, with a minimum of 200 mm, and switches in either Light-ON or Dark-ON mode via a PNP open collector output rated at 100 mA max. The cuboid PBT housing has an M8 4-pin connector, IP67 protection and a 12-24 V supply, with an operating range of −10 to 55°C. Manual adjustment and mutual interference prevention are included.

Omron E3Z-LR86 is a photoelectric sensor available from EP4 Solutions in new, unused condition. It is also referenced by the part numbers E3ZLR860MS, E3Z LR86.

This item is available to order. Contact our team for the current lead time. Priced at £149.59 excluding VAT.

Suited to detection tasks over longer distances in factory automation, where a retro-reflective sensor with a reflector is required. Its IP67 rating and M8 connector support installation in washdown-type or dusty environments within the stated temperature range.

EP4 Solutions is an industrial distributor, supplying electrical, controls and automation parts to industry since 1994. Trade accounts, quotations and worldwide delivery are available.

Brand new, unused product.

Specification sources: industrial.omron.eu

Specifications

ManufacturerOmron
Part numberE3Z-LR86
Alternative part numbersE3ZLR860MS, E3Z LR86
Product typePhotoelectric Sensor
ConditionNew
AvailabilityAvailable to order
Price (ex VAT)£149.59
Sensing methodRetro-reflective
Sensing distance7000 mm
Operation modeDark-ON, Light-ON
Type of lightLaser diode, red light
Output typePNP
Power supply voltage12-24 V
Connection methodConnector M8 - 4 pin
Degree of protection (IP)IP67
Light source (wavelength)Red LD (655 nm)
Control outputLoad power supply voltage: 26.4 VDC max., Load current: 100 mA max., Open collector output
Ambient temperature range (operating)−10 to 55°C (with no icing or condensation)
ShapeCuboid
Sensing distance (min.)200 mm
Setting methodManual adjustment
FeaturesM.S.R., Mutual interference prevention
Laser class1
Spot size5 mm
Response time1 ms
Material housingPBT
Thread sizeOther
Product Width (unpacked)10.8 mm
Product Height (unpacked)31 mm
Product Depth (unpacked)20 mm
Standard sensing objectOpaque: 75-mm dia. min.
Current consumption30 mA max.
Residual output voltageLoad current of less than 10 mA: 1 V max.; Load current of 10 to 100 mA: 2 V max.
Output mode switchingSwitch to change between light-ON and dark-ON
Protection circuitsReversed power supply polarity protection, Output short-circuit protection, Mutual interference prevention, and Reversed output polarity protection
Power reset time100 ms after the Sensor is turned ON
Sensitivity adjustmentOne-turn adjuster
Ambient illumination (Receiver side)Incandescent lamp: 3,000 lx max.; Sunlight: 10,000 lx max.
Ambient temperature range (storage)−25 to 70°C (with no icing or condensation)
Ambient humidity range (operating)35% to 85% (with no icing or condensation)
Ambient humidity range (storage)35% to 95% (with no icing or condensation)
Insulation resistance20 MΩ min. at 500 VDC
Dielectric strength1,000 VAC, 50/60 Hz for 1 min
Vibration resistanceDestruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistanceDestruction: 500 m/s² 3 times each in X, Y, and Z directions
Mounting screw tightening torque0.54 N·m max. (M3 screws)
Connector cover tightening torque (XS3F)0.3 to 0.4 N·m
IndicatorOperation indicator (orange); Stability indicator (green)
Pin assignment (M8 4-pin connector)Terminal 1: +V; Terminal 3: 0 V; Terminal 4: Output; Pin 2 is not used
Weight (packed state, standard connector)Approx. 20 g
Case materialPBT (polybutylene terephthalate)
Lens materialMethacrylic resin
MTTFd1,583 years
Need more than we have in stock, or an equivalent?

Our sourcing team finds obsolete and discontinued parts every day.

Ask about E3Z-LR86

More from Omron

All Omron parts →
OmronNew

E3S-CL2 2M

Photoelectric Sensor

Price £252.82 ex VAT
Available to order
OmronNew

E3Z-LL88

Photoelectric Sensor

Price £163.60 ex VAT
Available to order
OmronNew

8PFA

Relay Socket

Price £8.02 ex VAT
Available to order
OmronNew

D4B-4516N

Limit Switch

Price £56.48 ex VAT
Available to order
OmronNew

D4N-4A32

Safety Limit Switch

Price £12.08 ex VAT
Available to order
OmronNew

EE-SX872P

Photomicro Sensor

Price £32.24 ex VAT
Available to order