KFD2-SR2-Ex1.W
Also known as: 70101737, KFD2 SR2 EX1 W
- Brand new, unused
- Worldwide delivery & export docs
- Trade accounts available
- Call 0151 346 1380 for urgent requirements
About the Pepperl+Fuchs KFD2-SR2-Ex1.W
The Pepperl+Fuchs KFD2-SR2-Ex1.W is a new 1-channel isolated barrier switch amplifier from the KFD2-SR2 series. It accepts dry contact or NAMUR inputs, provides a relay contact output and supports line fault detection (LFD) with reversible operation. It runs from 19 ... 30 V DC (via Power Rail or terminals) with an ambient range of -40 ... 70 °C and is rated up to SIL 2 (SC 3) to IEC/EN 61508.
Pepperl+Fuchs KFD2-SR2-Ex1.W is a switch amplifier available from EP4 Solutions in new, unused condition. It is also referenced by the part numbers 70101737, KFD2 SR2 EX1 W.
This item is available to order. Contact our team for the current lead time. Priced at £127.79 excluding VAT.
Suitable for interfacing dry contact or NAMUR sensors and switches in hazardous areas where intrinsic safety isolation and SIL 2 safety functions are required. Specific installation applications should be confirmed against the product documentation.
EP4 Solutions is an industrial distributor, supplying electrical, controls and automation parts to industry since 1994. Trade accounts, quotations and worldwide delivery are available.
Brand new, unused product.
Specification sources: pepperl-fuchs.com
Specifications
| Manufacturer | Pepperl+Fuchs |
|---|---|
| Part number | KFD2-SR2-Ex1.W |
| Alternative part numbers | 70101737, KFD2 SR2 EX1 W |
| Product type | Switch Amplifier |
| Condition | New |
| Availability | Available to order |
| Price (ex VAT) | £127.79 |
| Rated voltage Ur | 19 ... 30 V DC |
| Rated current Ir | ≤ 35 mA |
| Contact loading | 250 V AC/2 A/cos φ > 0.75; 126.5 V AC/4 A/cos φ > 0.75; 40 V DC/2 A resistive load V AC / A |
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) |
| Degree of protection | IP20 |
| Mass | approx. 150 g |
| Dimensions (W x H x D) | 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) , housing type B2 |
| Signal type | Digital Input |
| Safety Integrity Level (SIL) | SIL 2 |
| Systematic capability (SC) | SC 3 |
| Connection (supply) | Power Rail or terminals 14+, 15- |
| Ripple | ≤ 10 % |
| Power dissipation | ≤ 0.7 W |
| Power consumption | ≤ 0.7 W |
| Connection | terminals 1+, 2+, 3- |
| Rated values | acc. to EN 60947-5-6 (NAMUR) |
| Open circuit voltage | approx. 8 V DC |
| Short-circuit current | approx. 8 mA |
| Switching point/switching hysteresis | 1.2 ... 2.1 mA / approx. 0.2 mA |
| Line fault detection | breakage I ≤ 0.1 mA , short-circuit I > 6 mA |
| Pulse/Pause ratio | min. 20 ms / min. 20 ms |
| Connection | terminals 7, 8, 9 |
| Output | signal ; relay |
| Minimum switch current | 2 mA / 24 V DC |
| Energized/De-energized delay | approx. 20 ms / approx. 20 ms |
| Mechanical life | 10^7 switching cycles |
| Collective error message | Power Rail |
| Switching frequency | < 10 Hz |
| Input/Output | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff V eff |
| Input/power supply | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff V eff |
| Output/power supply | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff V eff |
| Display elements | LEDs |
| Control elements | DIP switch |
| Connection | screw terminals |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Marking | Ex-Hexagon II (1)G [Ex ia Ga] IIC [exsign] II (1)D [Ex ia Da] IIIC [exsign] I (M1) [Ex ia Ma] I |
| Input Ex ia voltage Uo | 10.5 V |
| Input Ex ia current Io | 13 mA |
| Input Ex ia power Po | 34 mW (linear characteristic) |
| Maximum safe voltage Um (supply) | 253 V AC / 125 V DC (Attention! Um is no rated voltage.) |
| Maximum safe voltage Um (output) | 253 V AC (Attention! The rated voltage can be lower.) |
| Maximum safe voltage Um (fault indication output) | 40 V DC (Attention! Um is no rated voltage.) |
| EU-type examination certificate | PTB 00 ATEX 2080 |
| FM certificate | FM19US0207X (control drawing 116-0035) |
| UL approval | E106378 (control drawing 116-0473 (cULus)) |
| IECEx certificate | IECEx PTB 11.0034 , IECEx TUN 19.0013X |
Our sourcing team finds obsolete and discontinued parts every day.
Ask about KFD2-SR2-Ex1.W








