UC2000-30GM-IUR2-V15
Also known as: 104093, UC2000 30GM IUR2 V15
- Brand new, unused
- Worldwide delivery & export docs
- Trade accounts available
- Call 0151 346 1380 for urgent requirements
About the Pepperl+Fuchs UC2000-30GM-IUR2-V15
The Pepperl+Fuchs UC2000-30GM-IUR2-V15 is a single head ultrasonic sensor in a 30 mm diameter stainless steel housing, with a sensing range of 80 to 2000 mm. It provides one 4 to 20 mA current output and one 0 to 10 V voltage output, and is parameterised via the ULTRA 3000 service program or RS 232 interface. It operates from 10 to 30 V DC over -25 to 70 °C and has an M12 x 1, 5-pin connector with IP65 protection.
Pepperl+Fuchs UC2000-30GM-IUR2-V15 is an ultrasonic sensor available from EP4 Solutions in new, unused condition. It is also referenced by the part numbers 104093, UC2000 30GM IUR2 V15.
This item is available to order. Contact our team for the current lead time. Priced at £326.23 excluding VAT.
Suitable for distance or level measurement where an analogue signal is required from a stainless steel sensor. The synchronisation input allows it to be used in close proximity to other ultrasonic sensors while suppressing mutual interference.
EP4 Solutions is an industrial distributor, supplying electrical, controls and automation parts to industry since 1994. Trade accounts, quotations and worldwide delivery are available.
Brand new, unused product.
Specification sources: pepperl-fuchs.com
Specifications
| Manufacturer | Pepperl+Fuchs |
|---|---|
| Part number | UC2000-30GM-IUR2-V15 |
| Alternative part numbers | 104093, UC2000 30GM IUR2 V15 |
| Product type | Ultrasonic Sensor |
| Condition | New |
| Availability | Available to order |
| Price (ex VAT) | £326.23 |
| Sensing range | 80 ... 2000 mm |
| Operating voltage | 10 ... 30 V DC, ripple 10 %SS |
| Output type | 1 current output 4 ... 20 mA; 1 voltage output 0 ... 10 V mA / V |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Connection type | Connector plug M12 x 1, 5-pin |
| Degree of protection | IP65 |
| Housing material | stainless steel (1.4305 / AISI 303); PBT plastic parts |
| Mass | 170 g |
| Adjustment range | 120 ... 2000 mm |
| Dead band | 0 ... 80 mm |
| Standard target plate | 100 mm x 100 mm |
| Transducer frequency | approx. 180 kHz |
| Response delay | 65 ms minimum, 195 ms factory setting |
| Power consumption | ≤ 900 mW |
| Interface type | RS 232, 9600 Bit/s, no parity, 8 data bits, 1 stop bit |
| Resolution | evaluation range [mm]/4000, but ≥ 0.35 mm |
| Deviation of the characteristic curve | ≤ 0.2 % of full-scale value |
| Repeat accuracy | ≤ 0.1 % of full-scale value |
| Load impedance | current output: ≤ 500 Ohm; voltage output: ≥ 1000 Ohm |
| Temperature influence | ≤ 2 % from full-scale value (with temperature compensation); ≤ 0.2 %/K (without temperature compensation) |
| Factory setting evaluation limits | evaluation limit A1: 200 mm; evaluation limit A2: 2000 mm; rising ramp |
| Standards | EN IEC 60947-5-2:2020; IEC 60947-5-2:2019; EN 60947-5-7:2003; IEC 60947-5-7:2003 |
| UL approval | cULus Listed, General Purpose |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Transducer material | epoxy resin/hollow glass sphere mixture; polyurethane foam |
| Length | 114 mm |
| Diameter | 30 mm |
Our sourcing team finds obsolete and discontinued parts every day.
Ask about UC2000-30GM-IUR2-V15








